Ways to Prevent Flat Tires

A flat tire will stop your schedule when you need to travel to certain destinations. Moreover, flat tires can also leave you stranded on the side of the road, in dangerous locations in some situations. You can solve the problem by calling a local towing roadside assistance company that can get you out of the bind. However, the best way to prevent having flat tires is to keep the conditions of tires well. Following are some tips for tire maintenance.

Balanced Wheels

When the wheels are balanced, the tire tread will wear at the same rate. On the other hand, when the wheels are imbalanced, the tires will wear at different rates and you can end up having one flat tire faster than the other tires. One recommendation is to have the tires balanced every 3 thousand to 6 thousand miles. When you notice tires are not wearing off at the same rate, you need to have them fixed and balanced.

Inflating the Tires

Tire performance relies on how it is inflated. Over-inflated tires or under-inflated tires can affect the way a vehicle moves. It is crucial to the tires inflated with the right pressure so that it can prevent tire blowout and help the vehicle travel smoothly. The tire manufacturers will normally indicate what the pressure of the tire should be set. The recommended tire pressure for the vehicle can also be found at the side of the door of the driver’s seat. The label at the side of the door will specify several important information regarding the vehicle. The vehicle manual will also find information regarding recommended tire pressure.

The tire pressure will change depending on the difference in temperature. In a cold climate, the air in the tires will contract. So in order to maintain the right pressure during colder months, be sure to add more air during these times.

Tire Tread

Another common cause for flat tires is not enough tire tread. Generally speaking, the tread on tires tend to wear off after traveling about 13 thousand to 14 thousand miles. If this is too much to remember, you can also measure the tire tread using a depth gauge. However, should you not have this equipment, one simple way is to use a penny. Put the penny upside down with the front of the coin facing toward you. When you put the penny in the groove of the tire, you will not see the front of the coin. If you do, then the tread is low.

Franks Tow Trucks – Studio City Towing